Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: Outlines the boundaries of the Baltimore County Historic Districts. The agreement by the owners of 75 percent of the property within a proposed district’s boundary is required to form a local historic district. Any exterior modification or addition to a structure in a district, or any excavation, building, or demolition permit, is subject to approval by the Landmarks Preservation Commission.
Description: The National Register of Historic Places is the official list of the Nation's historic places worthy of preservation. Authorized by the National Historic Preservation Act of 1966, the National Park Service's National Register of Historic Places is part of a national program to coordinate and support public and private efforts to identify, evaluate, and protect America's historic and archeological resources.
Description: The LOMA feature class contains features for each address for which a LOMA has been issued by the Federal Emergency Management Agency (FEMA). A LOMA can affect flood zone determination without a map change. The feature class was created by interpreting the information contained on each LOMA and mapping the location(s) for each of the addresses cited in the document. A PDF of the LOMA document was associated to the feature as an attachment. For addresses having more than one LOMA, only a single feature was created and additional attachments were associated to the feature. This feature class contains “historical” LOMA location/documents not revalidated by FEMA.
Description: The LOMR feature class contains features for each address for which a LOMR has been issued by the Federal Emergency Management Agency (FEMA). A LOMR usually affects flood zone determination for a specific portion of a FIRM panel(s). The feature class was created by interpreting the information contained on each LOMR and mapping the location(s) for each reviision area in the document. A PDF of the LOMR document was associated to the feature as an attachment.
Description: This layer maps all the floodplain easements in the county. A floodplain easement is a legally enforceable agreement between the landowner and the County for the purpose of conservation of the floodplain. Floodplain easement polygons must not overlap, and can exist over more than one parcel.
Service Item Id: 0292bbb895634db8b3002387c1f6f3a5
Copyright Text: Baltimore County Office of Information Technology
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Min. Scale: 0.0 Max. Scale: 0.0 Label Placement: esriServerLinePlacementCenterStart Label Expression: [XS_LTR] Use Coded Values: true Symbol:
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: bold Font Decoration: none
Min. Scale: 0.0 Max. Scale: 0.0 Label Placement: esriServerLinePlacementCenterEnd Label Expression: [XS_LTR] Use Coded Values: true Symbol:
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: bold Font Decoration: none
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: The TZ_2020 feature class combined with the Int_2020 feature class represents the intersections with a level of service rating of D, E or F and the associated commutershed as represented on the 2020 Transportation Basic Services Map.During the current effective year, the “_YYYY” is dropped from the filename for the purpose of ensuring compatibility with existing County applications, hence TZ_2020 becomes TZ.The 2020 Transportation Basic Services Map was enacted under bill number 30-20 and is part of the Baltimore County Zoning Regulations, 1955 as amended by the bill adopted May 4, 2020. Effective May 18, 2020.The interpretation of the Basic Services Maps are subject to exceptions provided for in the Baltimore County Zoning Regulations, Article 4A Growth Management, Section 4A02 Basic Services Maps. These exceptions include those mapped in the County's geographic information system (GIS): the Urban and Rural Demarcation Line (URDL), Commercial Revitalization Districts (4A02.4.E.1.i), and the Towson Urban Center (4A02.4.E.1.j). The Towson Urban Center (Downtown Towson District) exists in the Master Plan 2020 in the Land Management Areas feature class.
Description: Existing boundaries of State-approved Rural Legacy areas. Baltimore County contains all or portions of 5 Rural Legacy areas: Piney Run, Coastal, Manor, Gunpowder and Long Green. This data includes the current and historical boundaries of each area.
Description: Planned Shopping Center - An integral retail shopping development for which an overall plan has been approved by the Department of Planning and which meets certain criteria.Planned Industrial Park - An integral industrial development for which an overall plan has been approved by the Department of Planning and which is under common ownership or control.Planned Drive-In Clusters — An integral commercial development for which an overall plan has been approved by the Department of Planning and which meets certain criteria.
Service Item Id: 0292bbb895634db8b3002387c1f6f3a5
Copyright Text: Baltimore County Department of Planning
Description: This map highlight areas of housing opportunity in Baltimore County. Opportunity mapping grows out of the idea that where one lives heavily influences one’s social, economic, and health prospects. On March 9, 2016 an agreement was signed between Baltimore County, HUD and three clients of the Baltimore County Housing Office and two local housing advocacy organizations, Baltimore Neighborhoods, Inc. and the NAACP, which depicted areas of opportunity in Baltimore County for affordable housing. Goals have been set to encourage affordable housing in these census tracts.
Description: This data shows the extends of the community associations in Baltimore County. It gives the name of the association and if the association is currently active in Baltimore County. This data can be linked to the Planning Dept. "contacts" database which contains the association contact information, president, terms, bylaws, etc.
Description: Boundaries for all the adopted community plans in Baltimore County. Community Plans are created to develop community-specific detail, relevant policies, and implementation strategies necessary to fulfill planning objectives of the communities.
ENCUMBRANCETYPE
(
type: esriFieldTypeString, alias: ENCUMBRANCE_TYPE, length: 50
, Coded Values:
[To Be Determined: To Be Determined]
, [Public Use: Public Use]
, [County Owned Off of Right-of-Way: County Owned Off of Right-of-Way]
, ...9 more...
)
Description: The Baltimore County Growth Tiers designate where major subdivisions on septic can or cannot be built. Tiers are defined as: Tier I - Served by public sewer and inside URDL, Tier IA - Served by public sewer and outside URDL, Tier II - Planned for public sewer and inside URDL, Tier IIA - Planned for public sewer and outside URDL or not currently planned for public sewer and inside URDL, Tier III - Large lot developments on septic, Tier IV - Preservation and conservation areas - No major subdivisions on septic. These areas were developed using a variey of data, including the URDL, Sewer Master Plan, Land Mgnt Areas, Rural Legacy Areas, Permanent Easements, Ag/Forested Land (from MDP), and MD's "Greenprint."
Description: The Wtr_2020 feature class represents water deficient areas as represented on the 2020 Water Basic Services Map.During the current effective year, the “_YYYY” is dropped from the filename for the purpose of ensuring compatibility with existing County applications, hence Wtr_2020 becomes Wtr.The 2020 Water Basic Services Map was enacted under bill number 30-20 and is part of the Baltimore County Zoning Regulations, 1955 as amended by the bill adopted May 4, 2020. Effective May 18, 2020.There were no deficient areas identified in 2020.The interpretation of the Basic Services Maps are subject to exceptions provided for in the Baltimore County Zoning Regulations, Article 4A Growth Management, Section 4A02 Basic Services Maps. These exceptions include those mapped in the County's geographic information system (GIS): the Urban and Rural Demarcation Line (URDL), Commercial Revitalization Districts (4A02.4.E.1.i), and the Towson Urban Center (4A02.4.E.1.j). The Towson Urban Center (Downtown Towson District) exists in the Master Plan 2020 in the Land Management Areas feature class.
Service Item Id: 0292bbb895634db8b3002387c1f6f3a5
Copyright Text:
Default Visibility: false
MaxRecordCount: 1000
Supported Query Formats: JSON, geoJSON
Min Scale: 0
Max Scale: 0
Supports Advanced Queries: true
Supports Statistics: true
Has Labels: false
Can Modify Layer: true
Can Scale Symbols: false
Use Standardized Queries: true
Supports Datum Transformation: true
Extent:
XMin: NaN
YMin: NaN
XMax: NaN
YMax: NaN
Spatial Reference: 2893
(2893)
Description: The Comprehensive Zoning Map Process (CZMP) takes place every four years where any citizen may request a zoning change on any property in the County. The request for change is mapped as an issue. The County Council enacting legislation for each issue whether to retain the existing zoning or to enact a different zone(s) or district(s).
Description: The Tree Inventory feature class illustrates the locations of trees in the county right of way in Baltimore County. This feature classs is still under development.
Service Item Id: 0292bbb895634db8b3002387c1f6f3a5
Copyright Text: This data was developed by the Baltimore County, Maryland Department of Public Works and Department of Planning.
Description: Forest Conservation areas\easements are established in Baltimore County to preserve the forested areas of the County especially in the rural areas. Different types of forest conservation exist in Baltimore County and they include: Critical Area Easement, Forest Buffer Easement, Forest Buffer Reservation, Forest Conservation Forest Buffer Reservation, Forest Conservation Forest Buffer Easement, Forest Conservation Easement, and Forest Conservation Reservation
Description: The MetroDistrict feature class contains the current land area included in the metropolitan district in Baltimore County. The metropolitan district is a land planning area determines the status of whether or not a property is eligible for public water and sewer services.The metropolitan district geodatabase includes the MetroDistrict, MetroDistrictLine, MetroDistrictPoly, and MetroDistrictMargin feature classes.
Description: The feature is a point shapefile to classify data. A manhole is a small covered opening in a floor, pavement, or other surface to allow a person to enter, especially an opening in a street leading to a sewer.
Service Item Id: 0292bbb895634db8b3002387c1f6f3a5
Copyright Text: Baltimore County, Maryland Department of Public Works
RESPONSIBLE_AGENCY
(
type: esriFieldTypeString, alias: Responsible Agency, length: 75
, Coded Values:
[DEPARTMENT OF PUBLIC WORKS: DEPARTMENT OF PUBLIC WORKS]
, [DEPARTMENT OF RECREATION AND PARKS: DEPARTMENT OF RECREATION AND PARKS]
, [DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY: DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY]
, ...4 more...
)
Description: The feature is a point shapefile that has three subtypes to classify data; cleanout, flushing structure, inline cleanout and lamphole. A cleanout is a capped end of a sewer line that is used to clear obstructions in the sewer line. An inline cleanout has a removable basket to filter sewage that collects large objects that could be circulating through. A lamphole is a reticulation sewer end of line access point to allow limited access to facilitate inspection or clearing of obstructions.
Service Item Id: 0292bbb895634db8b3002387c1f6f3a5
Copyright Text: Baltimore County, Maryland Department of Public Works
RESPONSIBLE_AGENCY
(
type: esriFieldTypeString, alias: Responsible Agency, length: 75
, Coded Values:
[DEPARTMENT OF PUBLIC WORKS: DEPARTMENT OF PUBLIC WORKS]
, [DEPARTMENT OF RECREATION AND PARKS: DEPARTMENT OF RECREATION AND PARKS]
, [DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY: DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY]
, ...4 more...
)
Description: The feature uses points to represent data and has nine subtypes; discharge structure, junction chamber, lift station, pump station, diversion chamber, diversion point, production well, treatment plant and storage basin. A discharge structure is a building that consists of concrete box culvert that discharges sewage into a body of water or an interior drainage system. A junction chamber is a section in a sewer system where the flow from one or more sewers joins or converges into the main sewer. A lift station is designed to move wastewater from lower to higher elevation, particularly where the elevation of the source is not sufficient for gravity flow, and all mechanical components are held underground. A pump station is used to move wastewater to higher elevations in order to allow transport by gravity flow and all mechanical components are held above ground. A diversion chamber is a chamber designed to direct a stream into a channel or channels. A diversion point is a specifically named place where water is removed from a body of water by canal, pipe, or other conduit. A production well is a development well used for production of water for injection purposes. A treatment plant is where the process of removing contaminants from wastewater and sewage is performed. A storage basin is an area to store wastewater in a man-made or earthen reservoir.
Service Item Id: 0292bbb895634db8b3002387c1f6f3a5
Copyright Text: Baltimore County, Maryland Department of Public Works
RESPONSIBLE_AGENCY
(
type: esriFieldTypeString, alias: Responsible Agency, length: 75
, Coded Values:
[DEPARTMENT OF PUBLIC WORKS: DEPARTMENT OF PUBLIC WORKS]
, [DEPARTMENT OF RECREATION AND PARKS: DEPARTMENT OF RECREATION AND PARKS]
, [DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY: DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY]
, ...4 more...
)
Description: The feature is a point shapefile that has three subtypes to classify data; duplex, simplex and progressive cavity. Simplex is a single piston reciprocating device that displaces fluids on both stroke cycles. In other words, the cylinder is filled with fluid above and below the piston, and pumps on both the up and down stroke. Simplex pumps may be powered by electric, gasoline, or diesel motors or by compressed air. Duplexconsists of two pumps that alternate the pumping process, thereby allowing it to be more efficient than a single version. This pump has a higher flow rate due to its not having a dead spot in the pump stroke. A progressive cavity is a type of positive displacement pump that transfers fluid by means of the progress, through the pump, of a sequence of small, fixed shape, discrete cavities, as its rotor is turned.
Service Item Id: 0292bbb895634db8b3002387c1f6f3a5
Copyright Text: Baltimore County, Maryland Department of Public Works
RESPONSIBLE_AGENCY
(
type: esriFieldTypeString, alias: Responsible Agency, length: 75
, Coded Values:
[DEPARTMENT OF PUBLIC WORKS: DEPARTMENT OF PUBLIC WORKS]
, [DEPARTMENT OF RECREATION AND PARKS: DEPARTMENT OF RECREATION AND PARKS]
, [DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY: DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY]
, ...4 more...
)
RESPONSIBLE_AGENCY
(
type: esriFieldTypeString, alias: Responsible Agency, length: 75
, Coded Values:
[DEPARTMENT OF PUBLIC WORKS: DEPARTMENT OF PUBLIC WORKS]
, [DEPARTMENT OF RECREATION AND PARKS: DEPARTMENT OF RECREATION AND PARKS]
, [DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY: DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY]
, ...4 more...
)
Description: The feature is a point shapefile that has six subtypes to classify data; air release, combination, flushing connection, terminal flushing, simple check and vacuum release. An air release is used for odor control, with the added benefit of preventing corrosion in the manhole or vault from di-hydrogen sulfate gas. A combination is two or more subtypes that are conjoined. The most common combination is a combination flushing and air/vacuum release valve manhole. A flushing connection is in the connection between the remote seal flange and the piping flange in which the flushing ring is used to clean and drain the remote seals when it is required. Terminal flushing are mechanisms that are installed in manholes, primarily at the upstream terminal ends of sewage main to facilitate the periodic flushing of the downstream mains. A simple check is a clapper which hangs from a hinge, the clapper shaft or pin, which is mounted to the underside of the bonnet, inside the valve body is designed to allow fluid to flow one way in a pipeline and inhibits backflow within the line. A vacuum release uses differential pressure between atmospheric pressure and the partial vacuum pressure maintained in the piping network and vacuum station collection vessel.
Service Item Id: 0292bbb895634db8b3002387c1f6f3a5
Copyright Text: Baltimore County, Department of Public Works
RESPONSIBLE_AGENCY
(
type: esriFieldTypeString, alias: Responsible Agency, length: 75
, Coded Values:
[DEPARTMENT OF PUBLIC WORKS: DEPARTMENT OF PUBLIC WORKS]
, [DEPARTMENT OF RECREATION AND PARKS: DEPARTMENT OF RECREATION AND PARKS]
, [DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY: DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY]
, ...4 more...
)
Description: The feature uses points to represent data and has five subtypes; flume, magnetic, sonic, venture, and weir. A flume is a fixed hydraulic structure that under free-flow conditions force flow to accelerate in such a way that the flow may be characterized by a known relationship between the sewage level at a single specified location and flow rate. A magnetic meter has a field that is applied to the metering tube, which results in a potential difference proportional to the flow velocity perpendicular to the flux lines. A sonic meter is a volumetric flow meter which requires particulates or bubbles in the flow. A venture is a hot and cold water meter capable of passing some small particulate matter. A weir is a structure consisting of an obstruction such as a dam or bulkhead placed across the open channel with a specially shaped opening or notch. The weir results an increase in the water level, or head, which is measured upstream of the structure.
Service Item Id: 0292bbb895634db8b3002387c1f6f3a5
Copyright Text: Baltimore County, Maryland Department of Public Works
RESPONSIBLE_AGENCY
(
type: esriFieldTypeString, alias: Responsible Agency, length: 75
, Coded Values:
[DEPARTMENT OF PUBLIC WORKS: DEPARTMENT OF PUBLIC WORKS]
, [DEPARTMENT OF RECREATION AND PARKS: DEPARTMENT OF RECREATION AND PARKS]
, [DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY: DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY]
, ...4 more...
)
Description: The feature is a point shapefile that has eleven subtypes to classify data; bend, cap, coupling, cross, fitting, reducer, sleeve, saddle, tee and wye. A bend is a single pipe joint that can be up to 90 degree angle. A cap is a sealed entrance point to get into the sewer line. A coupling is a flexible connector that has two metal fittings that grasps the pipe with the joint that can be tightened to specification. A cross is a joint with two entrances into the pipe on both sides. A fitting is a standard joint that is straight with no bends. A reducer is a converter that connects a larger pipe size to a smaller pipe size. A sleeve is a protective ring used to keep a pipe hole open and creating a cover barrier between a pipe and its surroundings. A saddle is used for lateral connections, eliminating the need for a T-fitting. A Tee is a perpendicular connection, most widely used in this dataset. A wye connects on a 45 degree angle.
Service Item Id: 0292bbb895634db8b3002387c1f6f3a5
Copyright Text: Baltimore County, Maryland Department of Public Works
RESPONSIBLE_AGENCY
(
type: esriFieldTypeString, alias: Responsible Agency, length: 75
, Coded Values:
[DEPARTMENT OF PUBLIC WORKS: DEPARTMENT OF PUBLIC WORKS]
, [DEPARTMENT OF RECREATION AND PARKS: DEPARTMENT OF RECREATION AND PARKS]
, [DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY: DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY]
, ...4 more...
)
Description: The feature is a line shapefile that has five subtypes to classify data; collector, inline storage, inverted siphon, overflow and tunnel. A collector is a conventional gravity sewer that is designed to the slope and size of the pipe adequate to maintain flow towards the discharge point without surcharging manholes or pressurizing the pipe. An inline storage refers to a number of practices designed to use the storage within the pipe system to detain flows by reducing peak flows. An Inverted Siphon allows sewage to pass under obstructions such as rivers. Unlike the main sewer pipe, the siphon pipes flow under pressure and must have flow velocities greater than 3 ft/s (0.9 m/s) to keep material suspended and several siphons having smaller diameters than the main sewer may be required. Overflows are extra pipeline that allows relief when there are more sewage than the pipe can handle in normal conditions. A tunnel is an underground passageway that has a pipeline within it.
Service Item Id: 0292bbb895634db8b3002387c1f6f3a5
Copyright Text: Baltimore County, Maryland Department of Public Works
RESPONSIBLE_AGENCY
(
type: esriFieldTypeString, alias: Responsible Agency, length: 75
, Coded Values:
[DEPARTMENT OF PUBLIC WORKS: DEPARTMENT OF PUBLIC WORKS]
, [DEPARTMENT OF RECREATION AND PARKS: DEPARTMENT OF RECREATION AND PARKS]
, [DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY: DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY]
, ...4 more...
)
Description: The feature is a line shapefile that has three subtypes to classify data; force, low-pressure, and vacuum. Force mains are pipelines that convey wastewater under pressure from the discharge side of a pump or pneumatic ejector to a discharge point. Pumps or compressors located in a lift station provide the energy for wastewater conveyance in force mains. A low pressure main uses a small pump stations to move wastewater through the transmission system. A vacuum evacuates air from a closed volume and develops a pressure differential between the volume and the surrounding atmosphere.
Service Item Id: 0292bbb895634db8b3002387c1f6f3a5
Copyright Text: Baltimore County, Maryland Department of Public Works
RESPONSIBLE_AGENCY
(
type: esriFieldTypeString, alias: Responsible Agency, length: 75
, Coded Values:
[DEPARTMENT OF PUBLIC WORKS: DEPARTMENT OF PUBLIC WORKS]
, [DEPARTMENT OF RECREATION AND PARKS: DEPARTMENT OF RECREATION AND PARKS]
, [DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY: DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY]
, ...4 more...
)
Description: The feature uses points to represent data and has nine subtypes; discharge structure, junction chamber, lift station, pump station, diversion chamber, diversion point, production well, treatment plant and storage basin. A discharge structure is a building that consists of concrete box culvert that discharges sewage into a body of water or an interior drainage system. A junction chamber is a section in a sewer system where the flow from one or more sewers joins or converges into the main sewer. A lift station is designed to move wastewater from lower to higher elevation, particularly where the elevation of the source is not sufficient for gravity flow, and all mechanical components are held underground. A pump station is used to move wastewater to higher elevations in order to allow transport by gravity flow and all mechanical components are held above ground. A diversion chamber is a chamber designed to direct a stream into a channel or channels. A diversion point is a specifically named place where water is removed from a body of water by canal, pipe, or other conduit. A production well is a development well used for production of water for injection purposes. A treatment plant is where the process of removing contaminants from wastewater and sewage is performed. A storage basin is an area to store wastewater in a man-made or earthen reservoir.
Service Item Id: 0292bbb895634db8b3002387c1f6f3a5
Copyright Text: Baltimore County, Maryland Department of Public Works
RESPONSIBLE_AGENCY
(
type: esriFieldTypeString, alias: Responsible Agency, length: 75
, Coded Values:
[DEPARTMENT OF PUBLIC WORKS: DEPARTMENT OF PUBLIC WORKS]
, [DEPARTMENT OF RECREATION AND PARKS: DEPARTMENT OF RECREATION AND PARKS]
, [DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY: DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY]
, ...4 more...
)
RESPONSIBLE_AGENCY
(
type: esriFieldTypeString, alias: Responsible Agency, length: 75
, Coded Values:
[DEPARTMENT OF PUBLIC WORKS: DEPARTMENT OF PUBLIC WORKS]
, [DEPARTMENT OF RECREATION AND PARKS: DEPARTMENT OF RECREATION AND PARKS]
, [DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY: DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY]
, ...4 more...
)
RESPONSIBLE_AGENCY
(
type: esriFieldTypeString, alias: Responsible Agency, length: 75
, Coded Values:
[DEPARTMENT OF PUBLIC WORKS: DEPARTMENT OF PUBLIC WORKS]
, [DEPARTMENT OF RECREATION AND PARKS: DEPARTMENT OF RECREATION AND PARKS]
, [DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY: DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY]
, ...4 more...
)
Description: A graphical representation of Blue Files, specifically the projects located in boxes 1 through 5. The locations were provided from physical maps and references held in the project folders.The established feature class contains attachments of the actual pdf file associated with each project folder.
Service Item Id: 0292bbb895634db8b3002387c1f6f3a5
Copyright Text: Baltimore County, Maryland Department of Public Works
Description: The sewer geodatabase consists of three feature data sets: Sewer_Areas, Sewer Features and Sewer Networks. The Sewer_Areas feature class represents the topology of the service area. The Sewer_Features represents feature classes for Lateral Line, Lateral Point, and Scada Sensor. The Sewer_Network represents feature classes for gravity and pressure mains, valves, manholes, cleanouts, fittings, pumps and annotation. The geodatabase includes tables containing the as-built construction drawing numbers. The tables have been joined to the features as views.
Service Item Id: 0292bbb895634db8b3002387c1f6f3a5
Copyright Text: Baltimore County, Maryland Department of Public Works
Default Visibility: true
MaxRecordCount: 1000
Supported Query Formats: JSON, geoJSON
Min Scale: 0
Max Scale: 0
Supports Advanced Queries: true
Supports Statistics: true
Has Labels: false
Can Modify Layer: true
Can Scale Symbols: false
Use Standardized Queries: true
Supports Datum Transformation: true
Extent:
XMin: NaN
YMin: NaN
XMax: NaN
YMax: NaN
Spatial Reference: 2893
(2893)
Description: The sewer geodatabase consists of three feature data sets: Sewer_Areas, Sewer Features and Sewer Networks. The Sewer_Areas feature class represents the topology of the service area. The Sewer_Features represents feature classes for Lateral Line, Lateral Point, and Scada Sensor. The Sewer_Network represents feature classes for gravity and pressure mains, valves, manholes, cleanouts, fittings, pumps and annotation. The geodatabase includes tables containing the as-built construction drawing numbers. The tables have been joined to the features as views.
Service Item Id: 0292bbb895634db8b3002387c1f6f3a5
Copyright Text: Baltimore County, Maryland Department of Public Works
RESPONSIBLE_AGENCY
(
type: esriFieldTypeString, alias: Responsible Agency, length: 75
, Coded Values:
[DEPARTMENT OF PUBLIC WORKS: DEPARTMENT OF PUBLIC WORKS]
, [DEPARTMENT OF RECREATION AND PARKS: DEPARTMENT OF RECREATION AND PARKS]
, [DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY: DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY]
, ...4 more...
)
Description: The sewer geodatabase consists of three feature data sets: Sewer_Areas, Sewer Features and Sewer Networks. The Sewer_Areas feature class represents the topology of the service area. The Sewer_Features represents feature classes for Lateral Line, Lateral Point, and Scada Sensor. The Sewer_Network represents feature classes for gravity and pressure mains, valves, manholes, cleanouts, fittings, pumps and annotation. The geodatabase includes tables containing the as-built construction drawing numbers. The tables have been joined to the features as views.
Service Item Id: 0292bbb895634db8b3002387c1f6f3a5
Copyright Text: Baltimore County, Maryland Department of Public Works
RESPONSIBLE_AGENCY
(
type: esriFieldTypeString, alias: Responsible Agency, length: 75
, Coded Values:
[DEPARTMENT OF PUBLIC WORKS: DEPARTMENT OF PUBLIC WORKS]
, [DEPARTMENT OF RECREATION AND PARKS: DEPARTMENT OF RECREATION AND PARKS]
, [DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY: DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY]
, ...4 more...
)
Description: Descriptive information about bridges includes use, operational status, feature carrier and intersected, any posted weight restrictions, design material and type, structure length, width of roadway, and the number of spans. Also inlcuded is the asset id of the bridge in the Structure Asset Management system (SAM) asset id.
Service Item Id: 0292bbb895634db8b3002387c1f6f3a5
Copyright Text: Baltimore County Department of Public Works
RESPONSIBLE_AGENCY
(
type: esriFieldTypeString, alias: RESPONSIBLE AGENCY, length: 75
, Coded Values:
[DEPARTMENT OF RECREATION AND PARKS: DEPARTMENT OF RECREATION AND PARKS]
, [DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY: DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY]
, [OFFICE OF BUDGET AND FINANCE: OFFICE OF BUDGET AND FINANCE]
, ...5 more...
)
OUTFALL_POINT_TYPE
(
type: esriFieldTypeString, alias: OUTFALL POINT TYPE, length: 20
, Coded Values:
[END SECTION: END SECTION]
, [END SUPPORT WALL: END SUPPORT WALL]
, [TYPE A ENDWALL: TYPE A ENDWALL]
, ...9 more...
)
RESPONSIBLE_AGENCY
(
type: esriFieldTypeString, alias: RESPONSIBLE AGENCY, length: 75
, Coded Values:
[DEPARTMENT OF PUBLIC WORKS: DEPARTMENT OF PUBLIC WORKS]
, [DEPARTMENT OF RECREATION AND PARKS: DEPARTMENT OF RECREATION AND PARKS]
, [DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY: DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY]
, ...4 more...
)
RESPONSIBLE_AGENCY
(
type: esriFieldTypeString, alias: RESPONSIBLE AGENCY, length: 75
, Coded Values:
[DEPARTMENT OF PUBLIC WORKS: DEPARTMENT OF PUBLIC WORKS]
, [DEPARTMENT OF RECREATION AND PARKS: DEPARTMENT OF RECREATION AND PARKS]
, [DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY: DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY]
, ...4 more...
)
INFLOW_POINT_TYPE
(
type: esriFieldTypeString, alias: INFLOW POINT TYPE, length: 20
, Coded Values:
[INLET: INLET]
, [TYPE A HEADWALL: TYPE A HEADWALL]
, [TYPE B HEADWALL: TYPE B HEADWALL]
, ...8 more...
)
INLET_TYPE
(
type: esriFieldTypeString, alias: INLET TYPE, length: 25
, Coded Values:
[SINGLE S COMBINATION: SINGLE S COMBINATION]
, [SINGLE E COMBINATION: SINGLE E COMBINATION]
, [DOUBLE S COMBINATION: DOUBLE S COMBINATION]
, ...19 more...
)
RESPONSIBLE_AGENCY
(
type: esriFieldTypeString, alias: RESPONSIBLE AGENCY, length: 75
, Coded Values:
[DEPARTMENT OF PUBLIC WORKS: DEPARTMENT OF PUBLIC WORKS]
, [DEPARTMENT OF RECREATION AND PARKS: DEPARTMENT OF RECREATION AND PARKS]
, [DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY: DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY]
, ...4 more...
)
RESPONSIBLE_AGENCY
(
type: esriFieldTypeString, alias: RESPONSIBLE AGENCY, length: 75
, Coded Values:
[DEPARTMENT OF PUBLIC WORKS: DEPARTMENT OF PUBLIC WORKS]
, [DEPARTMENT OF RECREATION AND PARKS: DEPARTMENT OF RECREATION AND PARKS]
, [DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY: DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY]
, ...4 more...
)
RESPONSIBLE_AGENCY
(
type: esriFieldTypeString, alias: RESPONSIBLE AGENCY, length: 75
, Coded Values:
[DEPARTMENT OF PUBLIC WORKS: DEPARTMENT OF PUBLIC WORKS]
, [DEPARTMENT OF RECREATION AND PARKS: DEPARTMENT OF RECREATION AND PARKS]
, [DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY: DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY]
, ...4 more...
)
RESPONSIBLE_AGENCY
(
type: esriFieldTypeString, alias: RESPONSIBLE AGENCY, length: 75
, Coded Values:
[DEPARTMENT OF PUBLIC WORKS: DEPARTMENT OF PUBLIC WORKS]
, [DEPARTMENT OF RECREATION AND PARKS: DEPARTMENT OF RECREATION AND PARKS]
, [DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY: DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY]
, ...4 more...
)
RESPONSIBLE_AGENCY
(
type: esriFieldTypeString, alias: RESPONSIBLE AGENCY, length: 75
, Coded Values:
[DEPARTMENT OF PUBLIC WORKS: DEPARTMENT OF PUBLIC WORKS]
, [DEPARTMENT OF RECREATION AND PARKS: DEPARTMENT OF RECREATION AND PARKS]
, [DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY: DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY]
, ...4 more...
)
RESPONSIBLE_AGENCY
(
type: esriFieldTypeString, alias: RESPONSIBLE AGENCY, length: 75
, Coded Values:
[DEPARTMENT OF PUBLIC WORKS: DEPARTMENT OF PUBLIC WORKS]
, [DEPARTMENT OF RECREATION AND PARKS: DEPARTMENT OF RECREATION AND PARKS]
, [DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY: DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY]
, ...4 more...
)
RESPONSIBLE_AGENCY
(
type: esriFieldTypeString, alias: RESPONSIBLE AGENCY, length: 75
, Coded Values:
[DEPARTMENT OF PUBLIC WORKS: DEPARTMENT OF PUBLIC WORKS]
, [DEPARTMENT OF RECREATION AND PARKS: DEPARTMENT OF RECREATION AND PARKS]
, [DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY: DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY]
, ...4 more...
)
RESPONSIBLE_AGENCY
(
type: esriFieldTypeString, alias: RESPONSIBLE AGENCY, length: 75
, Coded Values:
[DEPARTMENT OF PUBLIC WORKS: DEPARTMENT OF PUBLIC WORKS]
, [DEPARTMENT OF RECREATION AND PARKS: DEPARTMENT OF RECREATION AND PARKS]
, [DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY: DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY]
, ...4 more...
)
RESPONSIBLE_AGENCY
(
type: esriFieldTypeString, alias: RESPONSIBLE_AGENCY, length: 75
, Coded Values:
[DEPARTMENT OF RECREATION AND PARKS: DEPARTMENT OF RECREATION AND PARKS]
, [DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY: DEPARTMENT OF ENVIRONMENT PROTECTION AND SUSTAINABILITY]
, [OFFICE OF BUDGET AND FINANCE: OFFICE OF BUDGET AND FINANCE]
, ...5 more...
)
Description: The Water Plats Grid feature class was created by the City of Baltimore’s Department of Public Works and segments the area of the regional (city and county) water system into manageable areas for map production.
Name: Construction Inspection Districts Pumping Stations and Bridges
Display Field: INSPECTOR
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: Baltimore County has two distinct Construction Inspection Districts types: pumping stations and bridges and roads and utilities. Each of these types has been illustrated in a single polygon feature class contains that represent the construction inspection districts as determined by the Department of Public Works, Bureau of Engineering, Construction Contracts Administration.
Service Item Id: 0292bbb895634db8b3002387c1f6f3a5
Copyright Text: Developed by the Baltimore County Department of Public Works.
Name: Construction Inspection Districts Roads and Utilities
Display Field: INSPECTOR
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: Baltimore County has two distinct Construction Inspection District types: pumping stations and bridges and roads and utilities. Each of these types has been illustrated in a single polygon feature class contains that represent the construction inspection districts as determined by the Department of Public Works, Bureau of Engineering, Construction Contracts Administration.
Service Item Id: 0292bbb895634db8b3002387c1f6f3a5
Copyright Text: Developed by the Baltimore County Department of Public Works.
Description: The HighwayShopDistricts feature class contains the area within the County assigned to each highway shop. The highway districts geodatabase includes the HighwayShopDistricts, MasterDistrictLines and HighwayDistrict_Topology.
Description: The MasterDistrictLines feature class contains the boundry lines for each highway shop within the County.The highway districts geodatabase includes the HighwayShopDistricts, MasterDistrictLines and HighwayDistrict_Topology.
Description: Baltimore County's 17 officially designated Commercial Revitalization Districts are the "front doors" to our desired established communities. Each district is staffed by a planner who works closely with the business and property owners, business associations and the local communities to provide a range of services aimed at maintaining the health and vitality of our neighborhood commercial areas.
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Min. Scale: 0.0 Max. Scale: 0.0 Label Placement: esriServerLinePlacementCenterAlong Label Expression: [STLABEL] Use Coded Values: true Symbol:
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none